- Homepage
- Our Council
- Departments and Divisions
- Business Licensing Department
- One-Time Events
Events, Performances, and Parties – How to Do It Right and According to Law?
Where is it Legally Permitted to Hold an Event / Performance / Party?
- An event hall or event garden holding a valid business license
- A restaurant holding a business license may hold a number of events as part of its operations, within the restaurant area declared and approved in the business license and according to the occupancy capacity (number of patrons) specified in the license. The overall responsibility rests with the business owner for all aspects of the event such as: fire safety, security/safety, food, health, and accessibility.
What are Additional Feasible Solutions?
A business owner wishing to hold an event that is not within the terms of their business license shall act to obtain a one-time event license. To obtain a one-time license, the business owner must email an application for one-time approval to the Business Licensing Department specifying the date, hours, number of participants, site map, and type of event – and the application will be reviewed accordingly, provided the following conditions are met:
- Preliminary approval from the Business Licensing Department.
- Obtaining approval from relevant authorities (Police, Fire and Rescue, Health, etc.).
- The business owner / event producer is solely responsible for the event and shall be subject to updates/approvals/stipulations of the licensing bodies required for the event.
Any deviation from these conditions constitutes a violation of the Business Licensing Law and may result in the closure of the event and/or closure of the business premises by the various licensing authorities empowered to enforce by law.
Holding a Fair (Market) – Also Requires a Business License
A one-time mass gathering is a multi-participant event of "public entertainment" held in an open or enclosed place not designated for such in a valid business license (for example, events in parks, open terrain, throughout the settlement, in halls, and in other enclosed venues not designated for this purpose).
A one-time event requires a business license, but the licensing process differs from the routine, as event preparations take place within a short timeframe and a defined pace of activity.
An application to hold a one-time event begins by contacting Events Coordinator Tamir Arvili by email:
Tamir Arvili
Events Coordinator
The inquiry must include the date and nature of the event (event type, expected number of participants, structures, alcohol, food, and any other important detail).
An in-principle application to hold an event shall be submitted to the licensing authority on the Event Application Form and participant information.
The Authority will examine whether the event can be approved within its jurisdiction and whether it requires licensing.
For an application requiring a business license, the promoter will be directed to prepare a formal license application.
For an Event Not Requiring a License, the Promoter Will Be Directed to Proceed with the Following Entities:
- Approval of the land/property owner.
- Approval and coordination with the Police regarding safety and security matters.
- Professional approvals: safety engineer, structural engineer (if construction takes place on site), certified electrician tester.
- Fire and rescue approval as required.
- Medical evacuation coordination with MADA as required.
For an Event Requiring a License, the Following Must Be Attached:
- Information forms according to the event type
- Business layout integrated with a safety plan, signed by a certified professional and a safety engineer (both can be combined in one professional).
- Safety appendix for the event (as detailed below).
- Approval of the land/property owner where the event takes place.
- Third-party liability insurance certificate for the event or permanent insurance certificate for the venue.
- Insurance validity confirmation form for holding events.
- Signatory authorization and director appointment: A corporation must present confirmation from its attorney or CPA: Registrar of Companies certificate of registration and confirmation regarding authorized signatories on its behalf.
- Application form for operating a food stall at a one-time event. (Forms will be provided by the Business Licensing Department. Submit forms corresponding to the number of food entities participating in the event.)
- Signed noise prevention form accompanied by a guarantee check (the form will be provided by the Business Licensing Department).
Construction at the Event Site
- Engineering design by certified professionals.
- Execution of construction under the supervision of a certified engineering professional.
- Inspection by municipal engineers of structures and engineering approvals provided by experts, preferably up to 24 hours prior to the event.
- Approval by a safety engineer, structural engineer, and certified electrician prior to the event. Producer's responsibility.
- The producer, designer, and contractor are responsible for the safety and integrity of facilities and their compliance with all required standards.
- Duty of the producer to verify soil and infrastructure stability at the event venue.
- Producer's responsibility to employ a safety engineer to oversee the entire production process from planning, erection, final approval of the event site, and dismantling following the event.
- The producer is obligated to establish the site, plan the event, and manage it according to the safety standard for mass gatherings.
Approvals Required for the Event Prior to Issuing a License
Israel Police Requirements
Israel Police Uniform Specification Item 7.7 E
Fire and Rescue Services Requirements
As required under the reform, all licensing requirements appear on the 102 website
Ministry of Health Requirements
Application Form for Operating a Food Stall (One-Time Event, Food Fair).
Requirements for Food Stall Operators
- A business owner is required to employ a food safety supervisor
- All stalls must be connected to an electrical system supplying power during preparation stages and throughout event hours.
- Equipment and facilities must be equipped with temperature gauges, and each stall must have: heating facilities, cooling facilities, and temperature preservation equipment. Refrigerators and freezers must operate for at least several hours prior to the event and remain so until its conclusion.
- Dedicated space must be allocated for utensil and equipment storage
- Food stall layout must prevent cross-contamination between food in preparation and finished food
- Stalls must not be situated near a waste collection station
- Behind every 5 cooking stalls positioned in sequence and performing final processing but not adjacent:
- 2 large sinks with two stainless steel prep tables and at least one handwashing sink shall be installed. If shared sinks cannot be installed, a sink must be installed in each stall. Sinks must connect to water supply, sewage, and grease interceptor. Beside each sink, a liquid soap dispenser and paper towels must be installed.
- Every food stall must be covered by a canopy (storage, preparation, and serving area) or other sealed covering
- Food service must be carried out using disposable utensils, and storage, transport, and serving temperatures must comply with Ministry of Health requirements.
Food Transport and Acceptance
- Food transport must be carried out solely in vehicles holding an appropriate business license, kept clean.
- Hot food transport must be at a temperature of at least +70°C
- Cold food transport at a temperature of up to +4°C
- Animal products must be accompanied by municipal veterinary certificates.
- Imported food must hold food import approval and port clearance
- Delivery notes identifying the origin of food must be retained at the food stall
- If the transport vehicle is used for storage during the event, frozen/cold storage is permitted up to 6 hours. Food storage beyond 6 hours must be carried out in an active refrigeration/freezer facility.
- Convenient delivery access from transport vehicle to stall must be ensured
Food Storage at Stall by Temperature
Packaged food products at stalls shall be maintained at the following temperatures:
- Frozen products: -18°C
- Chilled products: +4°C
- Cheese products: up to +10°C
- Salads: up to +4°C
- Cakes with filling or frosting: +4°C
Food Handling at the Stall
- Sale of animal products or other home-prepared foods is strictly prohibited.
- Food, utensils, and equipment must be protected from environmental contamination
- At stalls selling food requiring thermal processing:
- Products shall be transported washed, cut, processed, seasoned, and ready for cooking.
- Do not thaw frozen food on site.
- Do not place equipment, food, and utensils on the ground/floor
- Only whole, legally labeled eggs stored at a temperature of up to +20°C may be used.
- All food items shall be refrigerated in small containers of 1–2 kg to ensure rapid cooling, with appropriate covers.
Food Safety Plan for Events with On-Site Food Preparation
- A food safety and sanitation consultant/supervisor shall be appointed for the event.
- A technical specification of all on-site food preparation processes shall be prepared.
- A list of food preparation and sales businesses participating in the event shall be prepared.
- Threshold condition for participation: holding a manufacturer license or business license.
- Refrigeration and food preservation measures on site.
- Food facilities erected at the event site, including water and sewage infrastructure.
- Planned inspection system, sample retention, and food laboratory oversight.
- Veterinary inspection of meat products brought into the event.
- Coordination of joint production inspections with the local authority and Ministry of Health, as well as daily debriefing and summary procedures.
Ministry of Education Requirements
1. General
1.1 This procedure addresses security arrangements to be implemented during activities and events conducted within the educational institution after formal school hours. The procedure specifies security measures to be carried out prior to, during, and after the event.
1.2 For each event, the school principal shall appoint an officer responsible for security, order, and participant safety, operating under the guidance of the school security coordinator who is guided by the Council Security Officer (KABAT).
1.3 The event manager appointed by the principal shall execute the security and safety instructions for the event and serve as the authority to issue directives in emergencies, as detailed below:
1.3.1 Maintain contact with the Council Educational Institutions Security Officer and inform them of all event details.
1.3.2 Deploy stewards and security guards at the institution according to Council Security Officer directives and brief them.
1.3.3 Supervise security guards and stewards during the event (regarding: work routine, scans, controlled access, conduct, and compliance with directives as required).
2. Security Plan
2.1 The security plan shall be approved by the Council Educational Institutions Security Officer, and shall include:
2.1.1 Static security guards at the main entrance gate;
2.1.2 Mobile security guards (patrol);
2.1.3 Stewards;
2.1.4 First responders / medics for events with more than 400 participants;
2.1.5 Evacuation vehicle for events with more than 1,000 participants.
2.2 Strict screening of all persons entering the event must be performed, including baggage inspection.
2.3 For events with over 500 people, a public address system must be installed.
2.4 Functionaries must be equipped with two-way radios.
2.5 For events likely to extend into dark hours, functionaries must be equipped with flashlights.